Products

Water Quality Sensors
DEC760
Digital Conductivity Sensor
A digital conductivity sensor that measures conductivity, salinity, and temperature.
Product Overview
DEC760is a digital sensor that measures conductivity, salinity, and temperature using a planar four-electrode graphite design.
Suitable for the metals, electronics, mining, paper, and semiconductor industries.
Supports immersion and pipeline installation at wastewater treatment plants, water treatment plants, and monitoring stations.
Specifications
| Measured Parameters | Conductivity, Salinity, Temperature |
|---|---|
| Measurement Principle | Planar four-electrode graphite conductivity measurement |
| Measurement Range | Conductivity: 1~200 mS/cm / Salinity: 0~175 ppt / Temperature: 0~50 °C |
| Resolution | Conductivity: 0.1 μS/cm / Salinity: 0.1 ppt / Temperature: 0.1 °C |
| Accuracy | 1–200 μS/cm: ±2% or ±2 μS/cm, whichever is greater; 200–2,000 μS/cm: ±2% or ±0.02 mS/cm, whichever is greater; 2–20 mS/cm: ±2% or ±0.2 mS/cm, whichever is greater; 20–200 mS/cm: ±2% or ±2 mS/cm, whichever is greater |
| Operating Temperature | 0~50 °C |
| Operating Pressure | ≤6 bar |
| Ingress Protection | IP68 |
| Power Requirements | DC 12 V (cable specification: DC +9–36 V) |
| Power Consumption | Approx. 0.6 W |
| Communication Protocol | RS485 / MODBUS-RTU |
| Temperature Compensation | Automatic / fixed / external temperature compensation (ATC / FTC / ETC) |
| Calibration Method | Up to 10-point calibration; offset adjustment |
| Calibration & Maintenance | Visual inspection: monthly / Calibration check: monthly |
| Installation Type | Immersion, pipeline |
| Dimensions | 35 mm diameter / 220 mm overall length (including foot guard) |
| Weight | Approx. 105 g (excluding cable) |
| Materials | PPS |
| Cable | M16 waterproof aviation connector / Standard 10 m / Custom lengths available |
A better approach to water quality management starts with Water Eyes.
Prompt, accurate responses to product inquiries and technical questions.

