Products

Water Quality Sensors
DEC890
Digital Conductivity Sensor
A digital conductivity sensor that measures conductivity and temperature.
Product Overview
DEC890is a digital sensor that measures conductivity and temperature using a two-electrode graphite design.
Suitable for the metals, electronics, mining, paper, and semiconductor industries.
Supports pipeline, immersion, and flow cell installation at wastewater treatment plants, water treatment plants, and monitoring stations.
Specifications
| Measured Parameters | Conductivity, Temperature |
|---|---|
| Measurement Principle | Two graphite electrodes |
| Measurement Range | Conductivity: 0~10 mS/cm / Temperature: 0.0~50.0 °C |
| Resolution | Conductivity: 0.01 μS/cm / Temperature: 0.1 °C |
| Accuracy | ±1% of range |
| Operating Temperature | 0~50 °C |
| Operating Pressure | 0~6 bar |
| Ingress Protection | IP68 |
| Power Requirements | DC 12 V |
| Power Consumption | Approx. 0.2 W |
| Electrical Isolation | Isolation between power supply and communication circuits |
| Communication Protocol | RS485 Modbus-RTU |
| Temperature Compensation | Automatic or manual compensation |
| Calibration Method | Offset, factor, and multipoint calibration |
| Calibration & Maintenance | Visual inspection: monthly / Calibration check: monthly (depending on operating conditions) / Seal maintenance: every two years |
| Installation Type | Pipeline, immersion, flow cell |
| Dimensions | 37 mm diameter / Approx. 261 mm overall length |
| Materials | 316 stainless steel / POM |
| Cable | Standard 10 m / Custom lengths available |
A better approach to water quality management starts with Water Eyes.
Prompt, accurate responses to product inquiries and technical questions.

