Water Quality Sensors

DRH890

Digital ORP Sensor

A digital ORP sensor that measures ORP and temperature.

DRH890is a digital sensor that measures ORP and temperature using an electrochemical method.

Suitable for the electronics, chemical, printing, dyeing, food, and pharmaceutical industries.

Supports immersion and flow cell installation in surface water, pure water, and circulating water systems.

Specifications

Measured ParametersORP, Temperature
Measurement PrincipleElectrochemical
Measurement RangeORP: -2,000~+2,000 mV / Temperature: 0.0~60.0 °C
ResolutionORP: ±1 mV / Temperature: 0.1 °C
AccuracyORP: 0.1% of range or ±2 mV, whichever is greater / Temperature: ±0.2 °C
Operating Temperature0~60 °C
Operating Pressure≤4 bar
Ingress ProtectionIP68
Power RequirementsDC 12 V
Power ConsumptionApprox. 0.2 W
Electrical IsolationInternal isolation between power supply and communication circuits
Communication ProtocolRS485 MODBUS / Modbus RTU
Temperature CompensationNot separately specified in the manual
Calibration MethodZero, slope, and offset calibration
Calibration & MaintenanceVisual inspection: monthly / Calibration check: monthly (depending on operating conditions) / Seal maintenance: every two years
Installation TypeImmersion, flow cell
Dimensions37 mm diameter / Approx. 261 mm overall length
WeightApprox. 500 g (excluding cable)
Materials316 stainless steel / POM
CablePUR (polyurethane) jacket / Standard 10 m / Custom lengths available

A better approach to water quality management starts with Water Eyes.

Prompt, accurate responses to product inquiries and technical questions.

Contact Us