Products

Water Quality Sensors
OPTU850H
Digital Turbidity/SS Sensor
A digital turbidity/SS sensor that measures turbidity and suspended solids.
Product Overview
OPTU850His a digital sensor that measures turbidity and suspended solids using infrared light scattered at 90 degrees.
Suitable for the metals, electronics, mining, paper, and semiconductor industries.
Supports immersion installation at wastewater treatment plants, water treatment plants, and monitoring stations.
Specifications
| Measured Parameters | Turbidity, Suspended solids |
|---|---|
| Measurement Principle | Infrared 90° scattered light |
| Measurement Range | Turbidity: 0.01~4,000 NTU / Suspended solids: 1~3,000 mg/L |
| Accuracy | ±5% of reading or 0.3 NTU, whichever is greater |
| Operating Temperature | 0~60 °C |
| Operating Pressure | ≤4 bar |
| Ingress Protection | IP68 |
| Power Requirements | DC 12 V |
| Power Consumption | 0.2 W |
| Communication Protocol | RS485, Modbus-RTU |
| Calibration Method | Zero, slope, and multipoint calibration |
| Calibration & Maintenance | Visual inspection: monthly / Calibration check: monthly (depending on operating conditions) / Seal maintenance: every two years |
| Installation Type | Immersion |
| Dimensions | 52 mm diameter / Approx. 189 mm overall length |
| Weight | Approx. 700 g (excluding cable) |
| Materials | 316 stainless steel / POM |
| Cable | Standard 10 m / Custom lengths available |
A better approach to water quality management starts with Water Eyes.
Prompt, accurate responses to product inquiries and technical questions.

